If you have an aquarium at your home, you have many responsibilities to take care of it. An aquarium is nothing but a beautiful piece of home that can increase the beautification of a home. But you will find it hard to maintain a dust-free fish tank. We are here to discuss on the process of resealing an Aquarium.
Moreover, you will face a lot of work to maintain a fish tank for your pretty fish. You have to be conscious to make your aquarium problem-free. Thus, if you find any leakage in your fish tank, you have to reseal it.
How to reseal the Aquarium is a complete discussion of the process of resealing an aquarium. Included, you will understand why fish tanks leak, and aquarium leak prevention. So, do not waste your time knowing the detailed procedure of resealing an aquarium.
The Process to Reseal an Aquarium
First, you need a stable and comfortable working space to complete the task successfully. Before describing the resealing process, we will share with you the list of tools and supplies for it. So, ensuring you have all of the components, you will find smooth processes.
- Silicon
- Paper Towel
- Single aged knife
- Masking tape
- Scraper
- Box Cutter
- Spray Bottle
- Painter Tools
- Distilled Vinegar
- Paper Towel
- Clean Rags
- Vacuum
- Disposable Gloves
Reseal an Aquarium: Some easy steps
Aquarium seam repair is not a tough task to do. But, you will find difficulties, if you are a new user of the aquarium. Let us follow our instructions to make your task easier:
Remove the fishes
First, you need to remove all of your fish from the tank. You may get another tank or any pot with water for temporary use only. This information will help your fish to keep alive during the repairing work of an aquarium.
Remove Old Sealant
To place the new sealing work, you need to remove all the older sealant from the seams of the tank. You can use a single aged knife to remove the silicon from the edges.
Clean the Aquarium
After removing the old silicon, clean the whole body of an aquarium properly. Then wait for a while to dry the tank.
There is another article on Cleaning the Aquarium, check here.
Using masking tape
Then you can use the masking tape for a parallel vertical joint. That will help you to make an easy finish after applying sealant.
Applying Sealant
After wrapping the masking tape, start applying the sealant on the seams of an aquarium. You can use any type of aquarium sealant for sealing the seams. But, make sure that you have filled all the gaps in the tanks. Also, make sure that any air bubble is not present inside the sealing.
Removing tape
After applying the sealant to the required areas of an aquarium, keep the tank free to be dry. Then remove the masking tape from the outside seams of the tank.
Check for leakage
Next, check the whole tank and make sure that there is no leakage in an aquarium.
Fill the water
After completing the checking procedure, fill the tank again. Then bring the fishes, and put them into the resealed aquarium.
The process of identifying the leakage of an aquarium
By following different ways, you can find the fish tank leakage. The easiest ways you will find to identify the leakage in your aquarium with the next few steps:
Visual Inspection
As an initial step, you can go through a visual inspection of your empty aquarium. You have to look at the areas of the joining on the aquarium, furthermore, you can try to find the cracks on the bottom of the aquarium too.
Filling up with Water
In this step, you need to fill up your fish tank with water. Then you have to wait for a few minutes to identify the water leaking from any edge or not. Due to the poor finishing of silicon sealant, this type of leakage may occur.
Using a paper towel
After filling water in the tank of fish, you can attach some papers to the seams of the tank. If there is leakage, the paper towel will become wet within a short time.
Looking for a sign of a leakage
Few leaks are hard to identify from the body of a fish tank. In that case, you may attempt the water filling process and visual inspection process. These tint leaks take time to appear with filling water. So, after filling the water, take a look at the whole tank to trace the location.
The causes of the leakage of an aquarium
You know that most aquariums need some glasses to develop a tank. These glasses need a sealant to join with each other to pour water into them. The poor process of sealant causes aquarium leakage. Sometimes, due to the use of a long time, the sealant becomes weak and produces a leakage.
If you want to know about making an Aquarium in Minecraft, then check here.
You can check this video too.
FAQs:
How much does it cause to reseal an aquarium?
The process of resealing large aquariums is not so costly. But, you may include your household tools like a knife, glass cleaner, etc. Besides, you need to purchase silicon and masking tape, if you do not have them in your home.
How can I remove old silicone from the aquarium?
By spraying distilled vinegar, a painter’s tool, and a single-edged knife you can remove the old silicone from the aquarium easily.
How to test leaks in an aquarium?
Visual inspection, filling water, using a paper towel is the process of testing leaks in an aquarium.
Is the common super glue safe for sealant in the aquarium?
The common super glues or any other aquarium silicone are safe for fish tanks. You can use them as a leakage without any hesitation.
Conclusion
Resealing a leakage in the aquarium is a tricky task to do. But, you need to identify the leaking area on the tank first. Once you locate the leakage, you can follow simple steps to fix it within yourself. We hope, How to reseal Aquarium is a perfect guide for you to reseal your aquarium.
If you want to know about the process of cleaning an Aquarium. Check here.
You can also check the article below for more information.
